产品规格

colorPol® 偏振片是一种带有高对比率以及出色透射性的二向色玻璃偏振片。在标准产品系列范围中,有UV波长范围(355 - 420 nm)与VIS 以及 IR(475 - 5,000 nm)的 colorPol® 偏振片供选择。在近距红外线范围中(1200 - 2,500 nm),我们推荐您使用colorPol® HT系列偏振片,它们具有高度的透射率,最高可达98 %。

在规范的波长范围中,对比度与透射率的最小值均被保证。比如C4表示对比度 >= 10,000 : 1,也就是104。最大偏振与对比度的光谱位置可以通过所选的技术参数设置。偏振的波长范围、对比度以及透射率也可以按照客户需求个别调整。

偏振片的典型厚度为 0.2 (± 0.05) mm 到 0.5 (± 0.05) mm。更高厚度可以通过在载镜上压层来实现。CODIXX提供的压层标准厚度为 2.0 (± 0.2) mm。更多尺寸与形状可以按照客户需求来定制。

借助独特的 colorPol® 技术,CODIXX成为了世界上首家生产结构化偏振片的公司。colorPol® S偏振片具有任意成型的区域,并带有不同的定向与波长范围。10µm范围之内的结构尺寸也可供您选择。

 

Unlaminated

Laminated1)

Optical parameter

Transmitted wavefront distortion (TWD)
at 633 nm over an inspection area of Ø 10 mm

< 3 λ< λ/4
Beam deviation< 20 arc min.< 1 arc min.
Accuracy of polarization axis to edge 2)< 0.5°
Acceptance angle 3), 4)± 20°
Refractive index at 633 nm (RI) 5)1.525 ± 0.005
Cosmetic parameter

Usual surface quality 6)

in dependence on MIL-O-13830A: S/D 40/20
Mechanical parameter
Clear aperture (CA)7)80% for parts < 2 x 2 mm²
90% for parts < 20 x 20 mm²
95% for parts ≥ 20 x 20 mm²
Edge chips8) 0.25 mm
< 0.05 mm on request
Specific weight2.5 ± 0.1 g/cm³
Coefficient of elasticity E70 ± 5 kN/mm² 
Physical parameter
Coefficient of thermal expansion (CTE)8.1 ± 0.3 x 10-6 K-1 (0-100°C) 
Specific heat1.0 ± 0.1 J/gK 
Thermal conductivity0.94 ± 0.05 W/mK 
Durability
Thermal cycle-40°C to +80°C 200 cycles
(DIN EN 60068-2-14 method Na)
 
Humid storage85°C, 85% rel. humidity, 1,000 h according to
Telcordia GR-1221-CORE
 
UV-stabilityUV-stability 20 mW/cm² after 60 h irradiation
without any degradation
 
Chemical resistancecolorPol® polarizers are insensitive to most organic
and cleaning solvents, acids and bases 9)
and distilled water.
 

1) laminated, ground an polished
2) less tolerance available upon request
3) exceeding this angle may lower contrast and transmittance
4) AR-coating may limit this angle
5) RI for other wavelengths on request
6) other quality grades available on request
7) AR-coated parts can have a circumferential coating edge up to 1mm wide
8) other specifications available on request
9) AR-coating may limit the resistivity